Model NO | HC-018-A(HAILONG II) |
Type | Lithium-ion 18650 10S4P |
Battery cell brand | Samsung/Panasonic/LG/China-made cell |
Battery dimension | 365*92*106 mm |
Nominal Voltage | 36V |
Nominal Capacity | 8AH,8.8AH,10.4AH,11.6AH,14AH |
Over discharge protection | 28±0.5v |
Over charge protection | 42±0.01V |
Charging current | ≤5 A |
Continuous discharge current | ≤15A |
Transient excess current | 60±10A |
Long cycle life | More than 500 times(80% DOD) |
Storage humidity | 25 to 85% RH |
Typical Internal Resistant | 20mΩ |
Storage humidity | 25 to 85% RH |
Battery case:
Battery pack inside:
1. High temperature resistance
2. High working voltage for single battery cells
3. Pollution-free
4. Long cycle life(≥500 times)
5. No memory effect
6. With short-circuit production function, safe and reliable
7. Factory price& High quality
8. No self discharge
9. Light weight, small size
1.Q: What is drop test?
A:Packs dropped from a height of 0.5 meter to cement ground, packs shall be dropped in each of three
mutually perpendicular directions. Total drop times are 6.
After that, Nickel film without shedding, no scratch, the voltage is OK.
2.Q: How to use the battery pack correctly
A: When you use the battery pack, please notice as below:
Charge:Connecting the battery pack to the charge controller, connect the charger to recharge.
Discharge:Connecting the battery pack to the load ,connect the load to discharge.
When you combine the battery with series or parallels, if there are oxidation layer on the surface,
you should brush surface to the metal glow with thin steel brush to lower the connective resistance to the minimal resistance.
When combining with many batteries, if the voltage between the two electrodes is over 36V,
the safe voltage for human beings, to guarantee the safety, you should not touch the two electrodes with your body.
3.Q: What special cautions are there?
A: Due to the voltage between two electrodes over the safe voltage of human beings, nobody
should touch the two electrodes by his body in case of his safety. During using the battery,
you need insulate the two electrode terminals and also the part outside the metal conductor,
in order to prevent the short-circuit incident. You should do the related safety-prevention
work well.